Diagram 2
ANTI-TIP RESTRAINTS:
5. a. Place the table in desired location. Mark wall with pencil.
b. Drill two holes into the wall using 1/4”drill bit and insert the plastic anchors (F).
c. Screw the hook (E) into the plastic anchor (F). Check and make sure the plastic anchor (F) is
securely held in the wall.
d. Set the table in place and hang the metal rings attached on back of console on to the hook
(E) (see Diagram2).
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
