2/3
Assembly steps with extension blocks:
1. Well place 2pcs of top stretchers between side frames (H), using bolts (F), lock washers (C)
and flat washers (D), don
’t tighten up at this step. (See Diagram 1).Then place bottom
stretcher between pedestals (H), using bolts (G), lock washers (C) and flat washers (D),
secure all by turning with allen wrench (A) in clockwise direction. (See Diagram 1).
2. Attach the extension blocks(L) to the side frames.Then attach the base rails (O) to the side
frames
with
extension blocks by using bolts (E), lock washers (C) and flat washers (D),
tighten all with allen wrench (A). (See Diagram 2)
3.
Place table top (P) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (F), lock washers (C) and flat washers (D), tighten bolts by turning with allen
wrench (A) in clockwise direction. (See Diagram 3)
Assembly steps without extension blocks:
Diagram 4 Diagram 5 Diagram 6
4.Unscrew bolts (E), lock washers (C) and flat washers (D) from base rails (O) (See Diagram 4).
5.Remove the extension blocks (L) from the side frame.
6.
Attach
base rails(O) to the side frame by using bolts (B), lock washers (C) and flat washers (D),
tighten all with allen wrench (A). (See Diagram 5)
7.
Place table top (P) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (F), lock washers (C) and flat washers (D), tighten bolts by turning with allen wrench
(A) in clockwise direction. (See Diagram 6)
8. Turn table upright.
