You can adjust the bolts under the top if the leaves are not leveling with the top. The steps for
adjusting the leaves lower and higher in order to keep it parallel with the top are listed below (See
diagram 6)
1. Loosen all of the bolts at the metal block.
2. Insert allen wrench (F) through the hole on to the head of the bolt on the “L” shaped metal
bracket.
3. Turn allen wrench (F) clockwise to raise the metal block, counter clockwise to low it, adjust it to
keep the leaves parallel with the top.
4. Tighten all bolts on the metal block.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
2/2
Instruction for the leaves:
1. Pull out the leaves as the arrow
direction shown in diagram 3.
2. Lift the leaves up and make them 1/2”
higher than the center top.(See
diagram 4)
3. Push and lay down the leaves as
shown in diagram 5.
4. There is a latch under both sides of the
leaf, unscrew the button by hand a little
and push it to the bottom of top, screw
the button tightly.
5. Before you put the leaves under the
top, please follow the reverse way of
step 4 to pull the latch back first.
Diagram 3
Diagram 4
Diagram 5
Diagram 6
