chaiR
adJUstment
gUide
tiLt – seat BacK angLe
The backrest is automatically in dynamic mode. To lock in
position, lean back until the backrest reaches the desired
angle then pull lever up to lock. To release lock, push the
TILT lever down and sit forwards to release lock.
sLide – seat dePth
To adjust seat depth, lift the SLIDE button and slide the
seat back or forward to the desired position. Return lever
down to lock in position.
LiFt – seat height
To adjust seat height, sit on the seat and pull the LIFT lever
upwards (the seat will drop slowly). Release the lever at
the desired height to lock the position.
To raise the seat, lift your weight off the seat, pull the LIFT
lever upwards (the seat will rise slowly). Return lever down
to lock the position.
tension contRoL
Pull out and turn the
adjustment mechanism
forwards to increase tilt
resistance and backwards
to reduce.
BacK height
To adjust the backrest height,
press the two buttons on back
frame and lift or lower the
back to your desired position.
Release to lock in place.
aRmRests
Press outer button to lift/lower;
press inner front button to slide
pads forward or backwards;
press inner central button to
adjust armrest width; and rotate
armrest to change angle.
eXecUtiVe headRest
Ergonomic: Lift or lower
to preferred position.
eRgonomic headRest
Tilt, lift or lower to preferred
position.
www.hoodseating.com
