_________________________________________________________________________________________________
U408_flowthermNT_B_e_160420
25/35
www.hoentzsch.com
Equivalency:
for each of the two inputs a display equivalency can be defined. For this
purpose the desired initial value of 4 mA or 0 V and the desired final value of
20 mA or 10 V is entered respectively.
Example: 4 ... 20 mA -> 900 ... 1600 hPA
Unit:
for each of the two inputs a unit of up to 5 digits for measured value display
can be entered.
Example: hPa
(unused digits are marked with an "*" and are not shown in the display
and data logger)
Analog output settings:
5.3.18
Output
Menu -> Settings -> Output
Settings for both analog output ports 1 and 2
5.3.18.1
Port
Selection of
analog output port
1 or 2. Setting the selected port under (5.3.18.2)
5.3.18.2
Source
Setting the source and measuring value equivalency for the
analog output port
selected under 5.3.18.1.
Selection:
FA, VA, TA
=
flow sensor
depending on selection under (5.3.20.1)
equivalency:
initial value analog output at 0 V in m/s
final value analog output at 10 V in m/s
example:
0 ... 10 V -> 0 ... 40 m/s
or:
0 ... 10 V -> 5 ... 20 m/s
Pt100
=
temperature sensor
Pt100
Equivalency:
initial value analog output at 0 V in °C
final value analog output at 10 V in °C
example: 0 ... 10 V -> -20 ... +100 °C
Counter settings:
5.3.19
Counter
Menu -> Settings -> Counter
5.3.19.1
Reset
Resets counter to 0
5.3.19.2
Decimals
Determines the number of decimal places (0, 1 or 2) for display
Display settings:
5.3.20
Display
Menu -> Settings -> Display
Settings for measured value display. Determines the quantity of the simultaneously displayed values /
input channel and assignment of these values to the 3 channels.
5.3.20.1
Sensor
Selection:
Sensor:
= flow sensor selection
