_________________________________________________________________________________________________
______________________________________________________________________________________
26/34
www.hoentzsch.com U426_flowtherm Ex_B_e_171206
If the data logger is switched on (see 5.3.23.1), the average is saved to the data logger with time stamp
by pressing
AVG.
Device settings:
5.3.21
Device
Menu -> Settings -> Device
The parameter to be set here affects the flowtherm Ex
Selection:
Date:
= sets the actual date
Time:
= ses the actual time
When changing the batteries the date and time
are buffered for several hours.
Language:
= selection of man-machine language German, English, French or
Japanese
Factory settings:
5.3.22
Factory settings
Menu -> Settings -> Factory settings
The flowtherm Ex is reset to factory settings, all settings are lost if they have not been previously saved to
a profile of their own (see 5.3.25)
The factory settings are preset as those found in the shipping documents. The values of customer or
application-specific measuring tasks as defined in the documents are taken into account.
Before restoring the factory settings the following confirmation prompt appears:
Restor factory setting?
Confirm with
. Cancel with
or
MESS.
Before resetting to factory settings save the actual settings to a profile (see 5.3.25), otherwise they will be
lost. Cancelling the factory settings does not affect the saved profile.
Data logger:
5.3.23
Data logger
Menu -> Data logger or
LOGGER
The data logger is for saving measured values generated in various measuring modes of long-term or
single measurement (see 5.3.20.1). The contents of the data logger can be viewed on the unit or down-
loaded, saved and subsequently processed via the USB port on a Windows PC with help of the optional
HLOG II software.
The measured values, defined under (5.3.19) for rows 1...3 are saved to the data logger. Date and time
are not logged separately, if these have been selected for measurement display.
Note: In this way the possible number of data records to be logged can be increased, as the length of the
data record is thus reduced. This has no impact on the time stamp for the logged values.
