Q: Will the OSD switch stay in same mode if camera
is powered off, or do you have to reset mode each
time you power it back up?
A: It will stay in the same output mode, do not need to
reset each time.
A: Why the color is black and white at daytime?
A: Make sure the camera video signal match your DVR.
First check the DVR signal type, then adjust the OSD
joystick to corresponding signal mode to make it match.
Make sure the camera and DVR are with same video
format, both NTSC or both PAL.
Q: Will this camera work with other brand DVRs?
A: Yes, it could work with most brand DVRs, please
make sure the DVR resolution and signal type is proper.
Q: I have an SDI system, is this compatible?
A: No.
Q: How to reset camera when accidentally change
NTSC to PAL and signal is gone
A: Change DVR from NTSC to PAL, the signal will be
back, then change the camera from PAL to NTSC by
OSD menu, then change the DVR from PAL to NTSC
back.
Q: Is there a way to turn off the IR? I have sufficient
light at night and would prefer that the IR not come
on at all.
A: There is NO switch to turn off the IR led, the light
sensor detect ambient light constantly and turn on/off
the IR led automatically.
If you have sufficient light at night and would prefer
color image, then press OSD joystick to start On-
