J07
A10
-
28
-
02
Installation of dust proof cover
(For updated version, the parts need to be purchased separately)
scale 1:5
K01
Transparent
cover
21*17.8*0.18cm
1piece
Statement: the lamp wires cannot be
inserted into the output socket.
– – Can use 7 batteries
– – Please notice the place of anode
and cathode when pit in the batteries
– – Rechargeable batteries are not blunt electricity
– – Rechargeable batteries can only be charged
under adult supervision
– – Rechargeable batteries should be
removed from the toy before charging
– – Different types of batteries cannot mix;
Do not mix new batteries in use with semi-used
batteries.
– – Run out of battery should be removed from the toy
– – The power shall not be short circuit
How to assemble the battery holder
Trim all the LED wiring to the same length.
Use a craft blade to carefully skim
over the plastic to bare the copper wire.
Twist the same color wire together.
Twist the following wire together:
(I) BLACK wire from the battery box with the WHITE
wire from LED bulb.
(II) RED wire from the battery box with the GREY wire from LED bulb.
Roll and seal the duly twist copper with
the white tape J07 provided.
white wire
from LED lamp
black wire from
battery box
grey wire
from LED lamp
red wire from
battery box
scale 1:6
K02
Transparent
cover
23*21*0.18cm
2pieces
scale 1:4
K03
Transparent
cover
23*17.44*0.18cm
2pieces
22
