18
P16
P14
D03
摇椅
B13
B13
B13
B13
B14
B14
B13
B13
B14
B14
(need
2pieces)
A24
-
52
D03
tofu
box
P08
P08
P08
P08
According to the template paper center line, use a knife to scratch a mark, gently fold it.
1
4
Cut out the material A22 according to the template paper before making.
A22
(
car repair shed
)
A22
(
car repair
shed
)
cherry
blossom
tree
bridge
clogs
rocking
chair
crap
flags
telegraph
pole
How to assemble the battery holder
Statement: the lamp wires cannot be
inserted into the output socket.
– – Can use 7 batteries
– – Please notice the place of anode
and cathode when pit in the batteries
– – Rechargeable batteries are not blunt
electricity
– – Rechargeable batteries can only be
charged under adult supervision
– – Rechargeable batteries should be
removed from the toy before charging
– – Different types of batteries cannot mix;
Do not mix new batteries in use with semi-used
batteries.
– – Run out of battery should be removed from
the toy
– – The power shall not be short circuit
grey wire
from LED lamp
red wire from
battery box
white wire
from LED lamp
black wire from
battery box
Trim all the LED wiring to
the same length.
Use a craft blade to carefully skim
over the plastic to bare the copper wire.
Twist the same color wire together.
Twist the following wire together:
(I) BLACK wire from the battery box with the WHITE wire from LED bulb.
(II) RED wire from the battery box with the GREY wire from LED bulb.
Roll and seal the duly twist copper with
the white tape P16 provided.
Take the battery holder into the empty slot as shown in the picture.
