1
2
3
2
1
2
1
4
5
6
7
1
Tips for assembling
Be sure to test the LED lights before making the lighting,
note that the LED white wire to the negative, gray wire
to the positive reference to the following figure
operation test.
Use the provide battery
holder. Make sue the
correct polarity.
Product comes with tool:
Bring your own tools:
White glue:
It dries slowly and
can paste materials
firmly without trace.
Can be used to paste
wallpaper and
printed paper.
Ruler:
For measuring
materials to identify
the number of
materials so as to
enhance
work efficiency.
Scissors:
Can be used to
cut printed
paper,cloth,etc.
Cutter kinfe:
For peeling off power
wire skin and cutting
off materials.
Alcohol gel:
It dries fast and can paste
materials firmly,but may
leave some trace. Can
be used to paste small
metal materials and
small components of
furniture.
Tweezers:
For holding small
materials and
rolling up iron
wire.
Screw Driver:
For fixing screws,
mostly can be used
to install doors and
music components.
Drill:
Can be used to
drill holes in timbers,
roll up hard iron
wire or fix screws.
Needle-nose pliers:
For cutting, bending wire,
folding harder material
How to assemble the battery holder
2. Use screw driver
and take the lid off
from the battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire
to grey wire. Connect
the black wire to white wire.
5.Wrap the exposed
wire with the tapes.
6. Place the box lid and
fastness with screw driver.
“-”negative
“+”positive
Example of parts rule
:
A01:The parts are directly in the box.;B01:parts in bag B;C01:part in bag C,and so on.
(Note: display the printing paper A10-01 in the step: the printing paper is placed directly in the box, part number is A10-01)
1
2
3
2
1
2
1
4
5
6
7
1
White glue:
It dries slowly and
can paste materials
firmly without trace.
Can be used to paste
wallpaper and
printed paper.