Examples of parts rule:
Aa01 : Th e p ar ts are directly in the packaging box; B0 1: The parts are in the B bag; C01: The parts are in the C bag, and so on. (Note:
The pr in ting pap e r is displayed in the step A04 -01 : The printing paper is dir ectly placed in the packaging (The part numbe r is A04-01
in the box)
1
How to assemble the battery holder
1.Material and tools needed:
- Battery holder, LED bulb,
tape, screw driver and 2 piece
AAA size battery(not provided)
2. Use screw driver and
take the lid off from the
battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire
to grey wire. Connect
the black wire to white
wire.
5.Wrap the exposed wire
with the tapes.
6. Place the box lid and
fastness with screw driver.
1.Picures shown on the package may be slightly different from the actual product.
2.All the materials are taken in the operation step, put the remaining materials back into
the original pocket until the installation is completed.(Avoid material loss during installation
)
3.The dimensions indicated in the step diagram are
“
cm”.
4.If there have template paper material, please cut the material according to the template
to avoid mistakes..
5.According to the part rule example at the bottom of this page
,
refer to the part on the part
number drawing, find the material object and compare with the material list, confirm and
install.(Wooden parts only)
6.Glue should not be applied too much, so as not to dry longer, overflow will affect the effect
of the finished product
.
7
..
Part shapes may differ from the photographs depending on he production batch
Be sure to test the LED lights before making the lighting,
note that the LED white wire to the negative, gray wire
to the positive reference to the following figure
operation test.
1
2
Tips for assembling
Testing on LED function
DO NOT contact the
LED wire end direct
to the battery cell.
Use the provide battery
holder. Make sue the
correct polarity.
Содержание L906
Страница 1: ...L906 Instruction manual ...
