Honeywell VSD-261P, Руководство по эксплуатации

Страница: 18 / 33

14
PreShot Setup
z Call PreShot
Delete PreShot
PreShot Name
1. Number 1
→
2. PreShot Setup
3. Call PreShot
4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
+
IRIS CLOSE When Done
Pan: 262.2 Tilt: 2.7 X8
+
Stored
Pan: 262.2 Tilt: 2.7 X8
PreShot Name
1. Number 1
2. PreShot Setup
→ 3. Call PreShot
4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
Call PreShot on the menu:
1. Move the joystick Left or Right or press OPEN to enter Number Editing
and select the desired PreShot Position.
2. Move the joystick Left or Right to move the cursor to edit the digit
number,
Press OPEN to confirm. Press CLOSE to finalize your selection and exit.
3. Move the cursor to select the Call PreShot Position.
4. Move the joystick Left or Right or press OPEN to call the PreShot
Position.
5. Press CLOSE to exit.
Delete Preset Position on the menu:
1. Edit the number to be deleted (Refer to Number Input Instruction)
Note: Select the PreShot Position to be deleted.
2. Move the cursor to select the Deleted Position.
4. Move the joystick Left or Right to enter the deleting position.
5. Press OPEN when done. Press CLOSE to exit.
PreShot Name
1. Number 1
2. PreShot Setup
3. Call PreShot
→ 4. Delete PreShot
5. Name _________
IRIS CLOSE to Exit
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
Setup the PreShot position on the menu
1. Move the joystick Left/Right or press OPEN to enter Display Options.
2. Move the joystick Left/Right to move the cursor to select the
PreShot Options.
3. Move the joystick Left or Right or press OPEN to enter PreShot Options.
4. Move the joystick Left or Right or press OPEN to enter Number Editing.
Note: Edit the Number on the PreShot Position.
5. Move the joystick Left or Right to move the cursor to edit the digit number.
(0-9)Press OPEN to confirm the selection. Press CLOSE to finalize
Your selection and to exit.
6. Move the cursor to setup PreShot Position.
7. Move the joystick Left or Right or press OPEN to enter the setup.
(Insure the figure of the desire PreShot Position).
8. Press CLOSE to save the setting and exit. When SAVED is displayed on
the screen, return to the menu.