Honeywell Vertex, Руководство по эксплуатации

Страница: 45 / 321

V
ertex
TM
72-Point Continuous Monitor
Vertex Technical Handbook 2-4
2.2.5 Sample Locations
Before installing the Vertex System, evaluate the
sampling locations to determine if excessive dust
or moisture are present. An external filter must be
used in all locations. Make sure you use the correct
filter. Dust may be a result of construction as well as
manufacturing activities. Moisture may occur from
rain entering a line at an outdoor sampling location
or from condensation caused by temperature
fluctuations. Water condensation in the sample lines
could cause false alarms.
Note:
aria les suc as air o t e olecular eig t
and te erature o t e sa le gas and t e
sical conditions o t e areas eing onitored
in uence t e lace ent o t e sa ling loca
tions. ou a need to consult our co an s
industrial gienist or sa et o cer e ore
installing sa le lines to deter ine our co
an s olic related to sa ling locations and
onitoring o t e desired sa le gas.
2.2.6 Sample Line Particulate Filter Use
See Appendix B, Specifications , to determine which
filter type should be used at the location.
2.3 Optional Floor Mounting
For added protection with optional floor mounts,
prepare floor anchors to secure the base of the
cabinet and prevent tipping. See
Appendix A,
Installation Drawings for floor mounting instructions.
2.4 Installing Sample Lines/ Filters
Use only FEP Teflon
®
tubing to assure proper
sample transport. Other types of tubing are not
sufficiently inert. See
Appendix B, Specifications ,
for tube specifications. FEP tubing can be ordered
from Honeywell Analytics.
Install sample lines from each location to the top of
the Vertex System. This procedure involves:
• 2.4.1 Sample Line Installation Requirements
• 2.4.2 Sample Line Connections
• 2.4.3 Installing Sample Line Particulate
Filters
Teflon ® is a registered trademark of E.I. du Pont de Nemours
& Company (DuPont).