background image

User Manual

4

homexpert

tm

 

by Honeywell THR840DUK Digital Thermostat

5

...an explanation for householders

A room thermostat simply switches the heating system on and off as necessary. It works 
by sensing the air temperature, switching on the heating when the air temperature falls 
below the thermostat setting, and switching it off once this set temperature has been 
reached. Turning a room thermostat to a higher setting will not make the room heat up 
any faster. How quickly the room heats up depends on the design of the heating system, 
for example, the size of boiler and radiators.

Neither does the setting affect how quickly the room cools down. Turning a room thermostat to a lower setting 
will result in the room being controlled at a lower temperature, and saves energy.

The heating system will not work if a time switch or programmer has switched it off.

The way to set and use your room thermostat is to find the lowest temperature setting that you are 
comfortable with, and then leave it alone to do its job. The best way to do this is to set the room thermostat 
to a low temperature – say 18°C – and then turn it up by one degree each day until you are comfortable with 
the temperature. You won’t have to adjust the thermostat further. Any adjustment above this setting will waste 
energy and cost you more money.

What is a room thermostat?

If your heating system is a boiler with radiators, there will usually be only one room thermostat to control the 
whole house. But you can have different temperatures in individual rooms by installing thermostatic radiator 
valves (TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature that is 
reasonable for the whole house. If you do have TRVs, you can choose a slightly higher setting to make sure 
that even the coldest room is comfortable, then prevent any overheating in other rooms by adjusting the TRVs.

Room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtains 
or blocked by furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat from 
working properly.

This Manual: http://www.manuallib.com/file/2598268

Содержание thr840duk

















Отзывы: