manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 274 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 274

262

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Certificates

Note:

Please refer to the Security Primer to prepare the Authentication Server and Access Point 
for communication.

Note:

It is important that all dates are correct on the Thor VM3 and host computers when using 
any type of certificate. Certificates are date sensitive and if the date is not correct 
authentication will fail.

Quick Start

Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.

1.

Generate a Root CA Certificate

 and download it to a PC.

2. Connect the Thor VM3 to the desktop PC using ActiveSync and copy the certificate 

to the Thor VM3 \System folder or use a USB thumb drive to transfer the certificate 
file.

3.

Install a Root CA Certificate

.

User Certificates are necessary for EAP-TLS.

1.

Generate a User Certificate

 and private key file and download them to a PC.

2. Connect the Thor VM3 to the desktop PC using ActiveSync and copy the certificate 

and private key file to the Thor VM3 \System folder.

3.

Install a User Certificate

 and the private key file.

4. After installation, perform a Suspend/Resume.

5.

Verify Installation

.

Generate a Root CA Certificate

Note:

It is important that all dates are correct on the Thor VM3 and host computers when using 
any type of certificate. Certificates are date sensitive and if the date is not correct 
authentication will fail.

The easiest way to get the root CA certificate is to use a browser on a PC to navigate to 
the Certificate Authority. To request the root CA certificate, open a browser to 

http://<CA IP address>/certsrv. 

Sign into the CA with any valid username and password.

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов