Honeywell Thor VM3 Скачать руководство пользователя страница 227 | Manualshive

Страница: 227 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 227

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

215

Automatic Firmware Update Utility

The automatic firmware update utility provides an automated process to update the
firmware on the Thor VM3. Firmware that can be updated includes BIOS, EC (Embed-
ded Controller) and Screen MCU (Micro Controller Unit). Firmware updates are distrib-
uted as cabinet (.cab) files. The .cab file contains the necessary firmware files (BIOS, EC
and Screen MCU) and a utility to install firmware files. The firmware update utility is
installed as part of the factory software load. This utility can be used to install newer
firmware or to revert to older firmware.

Use the Software tab of the

control panel to determine the currently installed

firmware versions.

It may be necessary to update firmware before installing an updated operating system.

Firmware Distribution Files

The following software files must be copied to the \System\FWUpdate folder in the
order listed. The files can be copied to the folder manually or remotely. Contact

Technical Assistance

for upgrade files.

FWxxyyzz.cab - This file contains the firmware update files and a utility to verify version
compatibility and install the firmware files. The file name is structured such that xx
identifies the last digits of the BIOS firmware version, yy identifies the Embedded Con-
troller firmware version and zz identifies the screen MCU version.

UpdateFW.tag - The file that triggers the update utility to begin. Be sure to copy this file
only after the .cab file has been copied. As soon as the Thor VM3 detects the presence of
this file, the unit reboots in five seconds.

Update Process

1. Copy the files listed above to the \System\FWUpdate folder. Copy the.cab file first

then the .tag file.

b. The Thor VM3 automatically reboots and starts the update process after

detecting the updatefw.tag file. No user intervention is required to reboot the
Thor VM3 or run the update utility after the reboot. The update utility operates in
a DOS screen.

c. If the update is not successful, the update is tried three more times.

d. If the update fails, the \System\FWUpdate folder is cleaned up leaving

flashapp.exe, a flashlog.txt and a retry.tag file.

e. Review the flashlog.txt file. The log file lists what firmware (if any) has been

installed. If an error has occurred during the update process, it is detailed in the
flashlog.txt file.

Be sure to copy the updatefw.tag file to the

\System\FWUpdate folder

last.

The Thor VM3 begins the reboot process after detecting this file.

«
...
225
226
227
228
229
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов