manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 162 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 162

150

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

About

Start > Settings > Control Panel > About

The data cannot be edited by the Thor VM3 user on these panels.

Software

Firmware Versions

The Software tab lists the firmware versions installed. The BIOS, EC and Screen MCU 
firmware versions are shown on this tab.

Language

The Software tab displays the localized language version of the OS image. The lan-
guage is identified as English only or + an additional language.

The languages are ordered separately and built-in to the OS image. The Thor VM3 may 
be preloaded with an English only OS. Contact 

Technical Assistance

 for information on 

installing an OS for a different language. The built-in languages are added to registry 
entries and are available immediately upon startup.

Versions 

The Versions tab displays the versions of many of the software programs installed. Not 
all installed software is included in this list and the list varies depending on the applica-
tions loaded on the Thor VM3. The Image line displays the revision of the system soft-
ware installed. Refer to the last three digits to determine the revision level.

Tab

Contents

Software

GUID, Serial Number, Windows Embedded Compact Version, OAL Version, Compile Version, 
and Language. Language indicates localized version.

Hardware

CPU Type, Codec Type, Display, and DRAM memory

Versions

Revision level of software modules and .NET Compact Framework Version. 

Network IP

Current network connection IP and MAC address. 

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов