Honeywell Thor CV31, Руководство пользователя, Страница: 51 / 90

Chapter 3 — Configure the Computer
Thor CV31 Vehicle-Mount Computer User Manual 43
4 Enter the SSID .
5 For Association , select WPA or WPA2 .
The default encryption is TKIP or AES , respectively.
6 For 8021x , select TTLS , PEAP , EAP-FAST , or TLS .
7 If you selected TTLS , PEAP , or EAP-FAST :
a For Prompt for Credentials , select Enter credentials now .
b Enter a User Name and User Password .
8 If you selected TLS , enter a User Name and Subject Name .
9 For Validate Server Certificate , select Yes .
10 Tap OK .
Configure WPA or WPA2 Personal (PSK)
Security with Funk Security
Before you set WPA or WPA2 Personal (PSK) security, you need to know
the pre-shared key for your access point or passphrase for your
authenticator. On your computer, you need to enable the radio and set
the date.
1 Start Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security .
3 Select a Funk security profile to configure.
4 Enter the SSID .
5 For Association , select WPA or WPA2 .
The default encryption is TKIP or AES , respectively.
6 For 8021x , select None .
7 For Pre-Shared Key , enter the pre-shared key or passphrase:
• Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for
your access point.
• Enter the passphrase (8 to 63 ASCII characters) for your
authenticator. The computer internally converts the passphrase to
a pre-shared key.
8 Tap OK .