130
131
At certain locations (especially those at high latitudes), sunrise and sunset events may not occur
within a 24 hour time frame.
Display Sunrise status Display Sunset status
FULL Sunrise at previous day FULL Sunset at next day or later
---- No sunrise for the whole day ----- No sunset for the whole day
Temperature and Humidity Mode
The weather station supports up to 5 remote thermo-hygro sensors, each sensor corresponding to a
separate channel for the temperature and relative humidity display. The temperature may be shown
in degrees Celsius ºC or degrees Fahrenheit ºF. The trend (rising, steady or falling) of all values is
also indicated on the display.
The main console unit uses the indoor temperature and humidity data to compute a comfort level
rating of Wet, Comfort or Dry.
A temperature alert function is available for each channel. It can be programmed to sound if the
channel temperature exceeds or falls below the pre-configured upper and lower limits.
Note: The temperature alerts have a 0.5 ºC hysteresis to prevent the alerts from sounding constantly
due to small fluctuations near the alert value. This means that after the temperature reaches the alert
value, it will have to fall below the alert value plus the hysteresis to deactivate the alert.
Accessing Temperature and Humidity Mode
From the main console unit: Press
UP
or
DOWN
until the IN icon on the upper right of the
display starts flashing.
Viewing Temperature and Humidity Display for each Channel
For Static Display:
In Temperature and Humidity Mode, each press of CHANNEL rotates display between different
channels.
For Cycling Display:
To enable automatic rotating between different channel displays, press and hold
CHANNEL
, until
the icon is displayed. Each valid channel will now be alternately displayed for 5s.
Rotating Between Temperature and Dew Point Display
In Temperature and Humidity Mode, each press of SET rotates temperature display between:
-Temperature and Relative Humidity
-Dew Point Temperature and Relative Humidity
Setting Units for Temperature Display (ºC or ºF)
In Temperature and Humidity Mode, press and hold SET to convert units between degrees Celsius
ºC and degrees Fahrenheit ºF.
Activating/Deactivating the Temperature Alerts
1. In Temperature and Humidity Mode, each press of
ALARM/CHART
rotates channel
temperature display between:
- Current Temperature for corresponding channel
- Upper Temperature Alert (displays OFF if deactivated): icon displayed
- Lower Temperature Alert (displays OFF if deactivated): icon displayed
2. When the above alerts are displayed, pressing
UP
or
DOWN
will activate/deactivate the corre
sponding alert.
Setting up the Temperature Alerts
1. In Temperature and Humidity Mode, press
ALARM/CHART
to select alarm which you wish to
configure.
2. Press and hold
ALARM/CHART
until channel temperature and or icon starts flashing in
the display.
3. Set Value for Temperature Alert:
Press
UP
or
DOWN
to adjust value. Press and hold either button for fast advance.
Press
ALARM/CHART
to confirm your selection.
4. Upon completion the display will be returned to the temperature alert selection screen.
Disabling when Temperature Alarms are Activated
To Disable Temperature Alarm(s):
Press
ALARM/CHART
to disable the alarm (s).
Viewing the Max/Min Channel Temperature and Humidity
In Temperature and Humidity Mode, each press of MEMORY rotates channel temperature and
humidity display between:
- Current temperature and humidity at remote sensor
- Minimum temperature and humidity at remote sensor
- Maximum temperature and humidity at remote sensor
Resetting the Max/Min Channel Temperature and Humidity Memory
In Temperature and Humidity Mode, press and hold
MEMORY
to clear memory for all channels.
Remote Sensor Status
The wave icon above the current channel display shows the connection status of the corresponding
remote sensor:
Icon
Status
Searching for remote sensor signals
Corresponding remote sensor successfully linked
No signals received for more than 15 minutes
TE821 IM (S&P) E.indd
13/11/06, 2:51 PM
130-131
