6
5
K
M
Q
N
O
L
P
THERMO – HYGRO SENSOR
MADE IN CHINA
TM
1
A
C
B
D
F
E
REAR VIEW
REMOTE SENSOR
A LED INDICATOR
Flashes once when the remote sensor transmits the reading
to the main unit.
Flashes twice indicating low battery
B BATTERY COMPARTMENT
Holds two AA-size batteries
C RESET
Resets all previous settings
D CHANNEL SWITCH
Selects the desired channel before installing batteries
E WALL-MOUNT RECESSED HOLE
Keeps the remote sensor on the wall
F
°
C/
°
F SWITCH
Selects the temperature display in Fahrenheit or Centigrade
FEATURES
• Remote temperature and humidity transmission to the
main unit via 433MHz RF signal
• Case can be wall mounted using build-in hanger
• 100 feet transmission range without interference
• LCD display of measured temperature and humidity
• 3 channel selection
• Temperature display selection- Fahrenheit or Celsius
K “UP” BUTTON
Scans UP through Moon phases
L “DOWN” BUTTON
Scans DOWN through Moon phases
M UNIT BUTTON
Selects pressure display unit ( hPA or mBAR )
N PRESSURE/ALTITUDE BUTTON
1). Allows to view sea level, pressure or elevation modes
2). Sets Sea Level
O BATTERY COMPARTMENT
Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries
P REMOVABLE TABLE STAND
Keeps unit in upright position
Q WALL-MOUNT RECESSED HOLE
Keeps unit on the wall
