manualshive.com logo in svg

Honeywell TB8220U1003 - Touchscreen Thermostat, 2h, Руководство пользователя, Страница: 22 / 32

Поделиться
Скачать
Honeywell TB8220U1003 - Touchscreen Thermostat, 2h Скачать руководство пользователя страница 22

22

62-3071—2

PARTIAL LOCKOUT 1

This mode locks all keys except HOLIDAY, OVERRIDE, and temperature Up/Down arrows:

— User can change the temperature setpoint, but cannot change schedule settings.

— The temporary temperature change lasts until next scheduled period. The screen 

displays that time.

— User can change the temperature setpoint, but cannot change schedule settings.

— Pressing HOLIDAY sets the temperature to the Unoccupied setting for the selected 

period of time. The next Occupied period switches back to the program settings.

— Pressing OVERRIDE sets the temperature to the Occupied setting for the selected 

period of time. The next Unoccupied period switches back to the program settings.

— To cancel the temperature override and follow the programmed schedule, press 

CANCEL.

— To unlock the screen, see Advanced Settings section.

PARTIAL LOCKOUT 2

This mode locks all keys except HOLIDAY and OVERRIDE:

— Pressing HOLIDAY sets the temperature to the Unoccupied setting for the selected 

period of time. The next Occupied period switches back to the program settings.

— Pressing OVERRIDE sets the temperature to the Occupied setting for the selected 

period of time. The next Unoccupied period switches back to the program settings.

— To cancel the temperature override and follow the programmed schedule, press 

CANCEL.

— To unlock the screen, see Advanced Settings section.

Содержание TB8220U1003 - Touchscreen Thermostat, 2h

































Отзывы:

Нет отзывов