Honeywell TB7100A1000 - MultiPro Commercial Thermostat Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 32

Honeywell TB7100A1000 - MultiPro Commercial Thermostat Скачать руководство пользователя страница 13

13

63-2674—01

5.

Use the Up and Down keys to change the number of days desired for the thermostat

to override the schedule.

6.

Press DONE.

NOTE: During a holiday, the word “Holiday” flashes.

7.

To cancel the Holiday Override early, press CANCEL.

NOTE: When the number of Holiday Override days expires, the screen shows

“Following Schedule” to indicate that the Holiday Override has ended.

Fan Status Displayed on Main Screen

AUTO

—fan is controlled by the system.

ON

—fan is continuously on.

LO

—fan is continuously on low fan speed.

MED

—fan is continuously on medium fan speed.

HI

—fan is continuously on high fan speed.

When the thermostat is running the fan, the fan blade symbol

appears next to FAN to

indicate the thermostat has the fan on.

NOTES:

—

If the mode is Occupied, fan control is On. The only thing that allows the fan to

turn off during occupied periods is a manual fan override from On to Auto.

—

If the mode is Unoccupied, fan control is the same as with the Auto setting.

This is true even when the display indicates “On”.

«
...
11
12
13
14
15
...
»

Содержание TB7100A1000 - MultiPro Commercial Thermostat

































Отзывы:

Нет отзывов