Honeywell TA3840, Руководство по установке

Страница: 22 / 28

Doc No: MI5008E – Revision 7 – ENG Data Processing Racks
TA3840 Installation Manual
22
TA3840R CPU board
(optional)
Configuration
A series of jumpers (JP) placed on the electronic board are used to drive the LED's for the
communication port 1.
The jumpers JP2 and JP3 must be placed towards top of the board, towards the upper terminal 2
wires.
The jumper JP1 is unused here, its position doesn’t matter.
7. COMMISSIONING
After installation of the racks, connection and setting of the electronic boards, check the system is
working properly.
Starting up is described in the chapter "Operation" of the technical manual MT5008E.
TA3840C rack and radar transmitters commissioning are carried out using the COM3840
software.
System use is described in the chapter "Operation in normal mode" of the technical manual
MT5008E
.
JP3
JP2