Honeywell Solaris MS7820, Руководство пользователя

Страница: 113 / 210

Prefixes/Suffixes
E
21
S
ECTION
E C
HARACTER
R
EPLACEMENTS
To replace a character:
1. Scan the Enter/Exit Configuration Mode bar code
(located on page xii, at the front of this guide).
2. Scan the Character to Replace Code (shown below).
3. Scan the ASCII Code Byte value of the character you wish to replace
(refer to the ASCII reference table in Section M).
4. Scan the Replacement Character bar code.
5. Scan the ASCII Code Byte value of the replacement character.
6. Scan
the Enter/Exit Configuration Mode bar code
(located on page xii, at the front of this guide).
Character to Replace No Replacement
³ 9 3 8 6 0 0 ³ 8 3 8 6 0 0
Replacement Character
³ 9 3 8 7 0 0