Solaris 7980g User Guide
81
Search Commands
Search forward for a character
F8
Search the input message forward for “xx” character from the current cursor
position, leaving the cursor pointing to the “xx” character.
Syntax = F8xx
where xx
stands for the search character’s hex value for its ASCII code. Refer to the
Conversion Chart (Code Page 1252),
beginning on page 224 for decimal, hex and
character codes.
F8 Example: Send bar code data that starts after a particular character
Search for the letter “D” in bar codes and send all the data that follows, including
the “D.” Using the bar code above:
Command string:
F844F10D
F8 is the “Search forward for a character” command
44 is the hex value for “D”
F1 is the “Send all characters” command
0D is the hex value for a CR
The data is output as:
DEFGHIJ
<CR>
Search backward for a character
F9
Search the input message backward for “xx” character from the current cursor
position, leaving the cursor pointing to the “xx” character.
Syntax = F9xx
where xx
stands for the search character’s hex value for its ASCII code. Refer to the
Conversion Chart (Code Page 1252),
beginning on page 224 for decimal, hex and
character codes.
Search forward for a string
B0
Search forward for “s” string from the current cursor position, leaving cursor
pointing to “s” string.
Syntax = B0nnnnS
where nnnn is the string length (up to
9999), and S consists of the ASCII hex value of each character in the match string.
For example, B0000454657374 will search forward for the first occurrence of the 4
character string “Test.” Refer to the
ASCII Conversion Chart (Code Page 1252),
beginning on page 224 for decimal, hex and character codes.
B0 Example: Send bar code data that starts after a string of characters
Содержание Solaris 7980g
