Honeywell Silent Knight SKE Series, Инструкция по установке и эксплуатации

Страница: 30 / 76

SKE-SeriesVoice Evacuation System Installation/Operation Manual
4-2 151267
SW2 Evacuation
Tone Pattern off off off ANSI Cadence This option selects the
tone sound that will be
made during
evacuation.
For UL 864
installations, this
option must be set to
ANSI cadence.
on off off March Code
off on off California
on on off Steady
off off on Alert Tone
on off on Hi-Lo
off on on ANSI Whoop
on on on Continuous Whoop
Local Mic.
Supervision
Selection off Not supervised This selection
determines if the local
microphone will be
supervised.
For UL 864
installations, this
option must be set to
O
N. OFF is not
acceptable for UL 864
installations.
on Supervised
Remote Mic off Not supervised This selection
determines if the
remote microphone
will be supervised.
For UL 864
installations, this
option must be set to
O
N. OFF is not
acceptable for UL 864
installations.
on Supervised
CMD1 uses
recorded
message off Play Pre-recorded
CMD1 message This option selects
which message will be
played for CMD1 or
CMD2, either the pre-
recorded or the
recorded message.
on Play Recorded
Message
CMD2 uses
recorded
message off Play Pre-recorded
CMD2 message
on Play Recorded
Message
Enter Record
Mode off
on
Table 4-1: DIP Switch Programming
DIP
Switch
Function
Switch Number
Setting Comments
1 2 3 4 5 6 7 8
firealarmresources.com