Sensepoint Plus, Sensepoint Pro, Series 3000 XPIS and Sensepoint XCD Duct Mounting Kit
Issue 3 07/2009
MAN0639
4
Assembling Detector Components
1 Fit the Detector to the Mounting Plate.
Screw the detector firmly into the plate mounting hole in a clockwise direction.
2 Fit the Sensor Retainer to the Detector.
NOTE THAT THE DETECTOR
SHOWN IS SENSEPOINT PRO
SENSEPOINT PLUS,
SERIES 3000 XPIS AND
SENSEPOINT XCD FIT IN
EXACTLY THE SAME WAY
3 Fit a link pipe
(5 mm ID)
between the retainer port and the gas inlet port on the underside
of the Mounting Plate.
Screw the retainer firmly onto the detector in a clockwise direction.
Note: Sensor retainer of duct mounting kit for Sensepoint Pro is not compatible with Series 3000 XPIS.
