User Guide for ScanPal EDA60K-0 Handheld Computer
Store the battery outside
the Handheld Computer
Put the battery in the charger.
=
Battery maintenance recommendations and safety
protection measures
•
Fully charge the battery before using it. The battery is only partly
charged when get packed.
•
Refer to the chapter "charging" to get the right process for battery
charging. Using the battery for other devices may cause damages
on the device or the battery.
•
Avoid battery or Handheld Computer drops. If you suspect that a
battery or Handheld Computer fails, send it to Honeywell service
center for verification.
•
This battery can only replace another AB18 battery. These
batteries have been tested and meet the appropriate safety
standards. If you need to replace the battery, please contact
Honeywell service representatives or the resellers.
•
There are security risks in waste batteries. Before cleaning up the
battery, stick the poles with insulation tape.
•
Do not modify the battery or attempt to insert foreign objects into
the battery.
•
Do not solder directly to the battery poles.
•
Do not short connect the battery and put the battery away from
metal objects.
•
Do not drop or mechanically shock or extrude the battery.
•
Do not disassemble or open the battery. Do not crush, bend or
deform the battery; Do not puncture, shred or burn the battery.
•
Do not immerse the battery in water.
Enabling Airplane Mode
If you don't need to connect to any wireless network, you can enable
the airplane mode to turn off all wireless receivers to save power.
1. Tap
Settings
.
2. Tap
More
under
Wireless & Networks
.
3. Select
Airplane Mode
box to enable airplane mode.
