Honeywell SC100, Руководство пользователя

Страница: 13 / 36

Honeywell
- 3 -
Sensitivity
Settings
Material
Detection
Radius
Applications Noise Level
G
noisy
Steel 1.5m
Free Standing Safes, Night
Deposit Safes, ATMs and
Chests with excessive noise
(internal or external)
Heavy noise level
Note

Sensitivity settings (G
high
, G
normal
, G
low
, G
noisy
) are defined in “
DIP Switch Settings
” on page
18
.

The parameters in the table above are for reference only, and they may vary according to
the quality of the material.

The detection range will be reduced if cracks and joints exist in the material.
Features
Seismic Vibration Detector SC100 has the following features:

24-hour detection of all known attack tools on Vault, Doors, Safes, ATMs, and so on.

Flat frequency non resonant response sensor for genuine frequency analysis.

Built-in diagnostic tool used to set detector sensitivity in relation to existing noise level.

DIP switch sensitivity settings adapt to various applications.

Integrated EOL resistors compatible with various control panels.

High detection capability due to new sophisticated signal handling and computer algorithms
incorporated.

Low current consumption.

Solid state change over alarm relay.

Multipurpose accessories provided with multiple applications.

Standard drill sheet protection.

Rate of Rise and temperature alarm.

Miniature metal housing – easy to fit in restricted spaces.

Approved by IMQ type 3 (pending), UL (pending), ULC (pending), CE, and CCC (pending).