12
TK_S014 – Installation Manual
MOUNTING THE DEVICE
Mounting on DIN/omega rail
The device is mounted on standard DIN/omega rail; to mount it you should follow these steps:
1. Hook the bottom of the RTU-A08 onto the upper margin of the DIN/omega Rail.
2. Push until it clips onto the rail. (See Figure 2).
CLIP
R
O
TA
TIO
N
Figure 2. Mounting onto the DIN Rail
Mounting the device into enclosures
Often a device is mounted, together with others, inside large enclosures with DIN/omega rails that provide
enough space for access and wire.
When a device need to be mounted into a small enclosure it minimum size must follow the dimensions
reported in the next figure.
120mm Min
15
0mm M
in
Internal
depth
80mm Min
DIN RAIL
4
5
mm M
in
CABLE ENTRANCE
Figure 3. Box with DIN Rail