manualshive.com logo in svg

Honeywell RTH5100, Руководство по эксплуатации, Страница: 18 / 24

Поделиться
Скачать
Honeywell RTH5100 Скачать руководство пользователя страница 18

69-1722

18

“Heat On” is 

not shown in 

the display.

Set the System setting to Heat and set 

the temperature setting above the room 

temperature. If “Heat On” is shown 

solidly in the display, but the heating 

system does not turn on, see “Heating 

system does not turn on” in 

theTroubleshooting Tips.

“Cool On” is 

not shown in 

the display.

Set the System setting to Cool and set 

the temperature setting below the room 

temperature. If “Cool On” is shown solidly 

in the display, but the cooling system 

does not turn on, see “Cooling system 

does not turn on” in the Troubleshooting 

Tips.

“Heat On” is 

flashing in the 

display (heat 

pumps only).

Compressor minimum-off timer is active.  

Wait up to five minutes for the heating 

system to turn on.

“Cool On” is 

flashing in the 

display.

Compressor minimum-off timer is active.  

Wait up to five minutes for the cooling 

system to turn on.

Troubleshooting Tips (Cont)

If . . .

Then . . .

Содержание RTH5100

























Отзывы:

Нет отзывов