Programmable Thermostat RTH2300
11
Press the
Set
button 3 times until
Set Schedule
appears. The Wake period is
displayed.
NOTE
: To set another period, press the
Set
button as many times as needed until the
desired period and the desired days are displayed and its time or temperature is flashing.
When the time flashes, press the
Up
or
Down
button to set the time.
Press the
Set
button.
To set the temperature for cooling mode, first place the
System
switch in
Cool
. To
set the temperature for heating mode, first place the
System
switch in
Heat
.
When the temperature flashes, press the
Up
or
Down
button to set the temperature.
Press the
Set
button.
Repeat steps 2 through 6 to set each of the remaining periods.
Once all changes are made, press the
Run
button to save them and return to
normal display. (The changes will automatically be saved if you do not press any
button for 60 seconds.)
Modifying the schedule
Wake for the
weekdays is set to
6 a.m. and 70°F
To skip a period
(except Wake),
press the
Hold
button for 4 seconds
while that period is
displayed.
