Honeywell RFID Kit Скачать руководство пользователя страница 9

8

PX4ie/PX6ie RFID Kit Installation Guide

Support

To search our knowledge base for a solution or to log into the Technical Support 
portal and report a problem, go to 

www.hsmcontactsupport.com

.

Documentation

Product documentation is available at 

www.honeywellaidc.com

.

Limited Warranty

For warranty information, go to 

www.honeywellaidc.com

 and click

 Resources > 

Product Warranty

.

Patents

For patent information, see 

www.hsmpats.com

.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in spec-
ifications and other information contained in this document without prior 
notice, and the reader should in all cases consult HII to determine whether any 
such changes have been made. The information in this publication does not 
represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained 
herein; nor for incidental or consequential damages resulting from the furnish-
ing, performance, or use of this material. HII disclaims all responsibility for the 
selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. 
All rights are reserved. No part of this document may be photocopied, repro-
duced, or translated into another language without the prior written consent of 
HII.

Copyright



2009-2020 Honeywell International Inc. All rights reserved.

Содержание RFID Kit










Отзывы: