Honeywell Rapid Eye, Руководство по установке

Страница: 55 / 82

Rapid Eye™ Multi-Media DVR Installation Guide
Document 800-02607V3 Rev A 55
11/09
Connecting a PTZ Dome
Connection to the DVR
Connect the Data In port of a PTZ dome (an RS485 connector) to one of the ports on a
Multi-Media DVR. Serial ports 1 to 8 do not need a 232/485 converter.
Figure 5-3 Serial Ports 1 to 8
ACUIX Camera
An ACUIX™ PTZ camera dome with Intellibus™ can be connected to a Rapid Eye
Multi-Media DVR and configured using Rapid Eye View software.
1. Set ACUIX cameras to their Intellibus mode (Intellibus-PTZ).
2. Set DIP switch 5-8 to ON, on each ACUIX camera. Set the Camera Address using
rotary switches (SW1 to SW4) on the PCB at the base of the dome. Do not use the
same Camera Address on two or more domes connected to the same bus.
3. Connect the ACUIX cameras to a port on the Rapid Eye DVR.
4. Notify the Multi SA of the number of the port used on the Rapid Eye DVR and the
Camera Address used for each ACUIX camera.
Many PTZ Domes on One Serial Communications Line
You can connect up to 16 domes on one communication line connected to the Multi-Media
DVR. Terminate the communication input(s) of the last dome in the chain. Leave other
domes un-terminated.
HD6/KD6/KD6i Domes
The HD6 / KD6 / KD6i domes cannot share the same serial communications line with other
makes and models of domes.
Serial Ports 1 to 8 with built-in
RS232/RS485 converter
See Connectors for
Serial Communications
on Ports 1 to 8
on page
52 for pinout information
for serial ports 1 to 8.