Rapid Eye™ Multi-Media DVR Installation Guide
Document 800-02607V3 Rev A
27
11/09
Figure 2-2
Camera Connections to DVR
Connect the camera sequentially; that is, connect the first camera to VIDEO IN 1, the
second camera to VIDEO IN 2, and so on.
The BNC connector’s low signal loss, ease of twist-on installation, and small size, make it
a common connector for CCTV connections. Honeywell recommends using a solder- or
crimp-type connector.
Video is quite sensitive to bad connectors; do not use screw-type connectors. These can
seriously compromise the performance of your DVR.
Rapid Dome or Rapid Dome Gold Dome Systems
With Rapid Dome or Rapid Dome Gold dome systems, using twisted pair transmission,
Honeywell recommends that passive-to-passive transmission distances be no more than
500 feet (154 meters). For greater distance, please use an active receiver such as an
HUTP652R.
Detachable Camera I/O
A detachable sub-panel is used for mounting the camera input/output (I/O) connectors and
monitor outputs. This is convenient for swapping the DVR with another without having to
disconnect cameras.
IN
OUT
IN
OUT
1
2
Содержание Rapid Eye
