Honeywell Rapid Eye, Руководство администратора

Страница: 219 / 294

Rapid Eye Multi-Media DVR System Administrator Guide
Document 800-02953V4 Rev A 219
03/10
Figure 11-1 Adding an Alarm Station
Reducing Alarm Station Complexity by Adding Alarm Station Definitions
Adding Alarm Station Definitions For View operators that use sites in many different
areas, you have the option of creating two (or more) alarm station records to shuttle alarms
to the same PC. Duplication can reduce complexity, especially where customized dial-up
connections are needed. For example, you could have one definition for local sites, and
another for sites in other cities.
Use Descriptive Names To further avoid complexity, use descriptive names such as
[location name] units or [city name] units (
Chicago sites
or
Illinois sites
).
Identifying and Defining a Connection
Caution Honeywell recommends that Multi SAs check if their organization allows the
type of connection they plan to use.
For example, your organization may not allow connecting by modem to a
PC on its network if this bypasses a firewall.
Enter either dial-up information, an IP address, or both (as listed in Table 11-1 ) in the
Connection area of the Add Alarm Station dialog box ( Figure 11-1 ). Connection data is
compulsory when adding an alarm station.