Honeywell Rapid Eye, Руководство администратора

Страница: 201 / 294

Rapid Eye Multi-Media DVR System Administrator Guide
Document 800-02953V4 Rev A 201
03/10
6. Update security at each site you have denied access to. The procedure to update
security is in
Updating Security on a Multi-Media Unit on page 143 .
TIP! Why deny or limit access to a site?
This depends on your organization’s security protocols. An operator might be allowed
to monitor only some sites, and so on.
Limiting the Time that a Unit Can Be Used
Figure 10-8 Setting an Account’s Session Time Limit
Select the Time limit option and set the number of minutes that the user can access the sites
for (see
Figure 10-8 , above).
You can also set the default time limit for new users on the Options dialog box of the Admin
application (see
Figure 11-9 ). Select View
❱
Options in the Admin application to open the
Options dialog box. Select the Default time limit of a new User (in minutes) checkbox
and then adjust the minutes as needed with the up and down arrows (
).
Limiting the Use of Cameras and Other Devices by Partitioning
You can deny access to some or all devices at a site (including cameras and POS devices).
By default, a user account can access every camera at a site.
TIP! Why deny access to a device? This depends on your organization’s security
protocols. Perhaps an operator should only monitor some cameras, and not others.
Select to limit site
access time
Select the sites
that can be
accessed by
the user