BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
36
EN1B-0198GE51 R1004B
6.5.4
load
- Load executable
The command
load
is a direct command which
immediately starts downloading the application
firmware image into the BNA based on the
download configuration
defined by the command
dc
.
After loading the image into local memory, the
BNA Bootloader starts copying the image into the
local Flash memory where it resides until updated
the next time.
load
accepts optional command-line parameters.
Accepted command-line parameters are
FTP-Server
IP-Address
and/or
filename
. Command-line para-
meters supersede the current download con-
figuration for these elements. Command-line para-
meters in the
load
command scope can be used to
use an alternative FTP-Server for downloading or
to download another application firmware image
into the BNA device.
If
load
fails, then it needs to be checked whether the
correct download configuration has been defined.
In this case, the command
dc test
becomes useful.
6.5.5
ping
- ping
Sends an ICMP Ping through TCP/IP to the FTP-
Server defined in the download configuration or to
the machine addressed by the IP-Address in the
optional command-line parameter.
This command can be used to check whether the
network connection is working properly.
