background image

 

 

POWER PRESENTER RF 

 

Instruction Manual 

 

The POWER PRESENTER RF remote is a handy, compact presentation tool. It allows you to control slides 
in any presentation or slide show software. The Power Presenter RF remote includes a built in laser pointer. 
The kit includes: a remote with laser pointer (battery included), a receiver, a USB cable and a nylon 
carrying case. The POWER PRESENTER RF uses radio frequency technology, so you don’t have to point 
the remote at the receiver to control your slides. The maximum operating distance between the remote and 
the receiver is 150 feet, depending upon operating environment. 

 
System Requirements 

The only system requirement is USB compatibility. The POWER PRESENTER RF is “plug and play” 
compatible with MAC OS 8 or higher and Windows 98, NT, 2000, XP or higher.

 

 
Connecting the Receiver to the Computer 

For maximum range, the receiver should be placed as far away as possible from any electronic devices.  

Using a USB connection (MAC OS 8 or higher and Windows 98, NT, 2000 or higher) 

1) Turn on your computer and let it fully boot-up. 
2) Plug Type-A end of the USB cable into the USB port on your computer. 
3) Plug Type-B end of the USB cable into the USB port on the receiver. 

Note: 

The Type-A USB port on the receiver is used for connecting additional USB devices 

To your computer through your Power Presenter receiver unit. 

4)

 

The computer should automatically recognize the receiver as a new 

hardware after about 5 to 15 seconds, depending on the computer.                     
Follow the instructions for installing new hardware (you may need to 
load the necessary USB driver from your operating system disk). Once 
 your computer has installed the receiver as new hardware it will not need  
to run through the same steps again.  Next time you plug the receiver into  
the same computer, it will take about 5 to 10 seconds to recognize the receiver.  During the 5 to 10 seconds 
there may be little or no indication that the computer is communicating with the receiver. 

 

Connecting Another USB Device

 

The USB Type-A, female port (rectangular shaped Usb female connector) on your POWER PRESENTER 
RF receiver is connected to an internal USB hub port. This port will allow you to connect other USB 
devices to your computer through your POWER PRESENTER RF receiver unit. To use this port, simply 
connect a USB device with a Type-A, connector into the port.  
 

Note:

 USB 2.0 devices will work at USB 1.1 speeds when connected to this port as the POWER 

PRESENTER RF is a USB 1.1 compatible device. 

 

Part # PPRF 

 

Содержание POWER PRESENTER RF

Страница 1: ...B end of the USB cable into the USB port on the receiver Note The Type A USB port on the receiver is used for connecting additional USB devices To your computer through your Power Presenter receiver unit 4 The computer should automatically recognize the receiver as a new hardware after about 5 to 15 seconds depending on the computer Follow the instructions for installing new hardware you may need ...

Страница 2: ...strokes 1 Turn on your computer and let it fully boot up 2 Plug the USB cable into the back of your computer 3 Plug the other end of the USB port on the receiver 4 Launch a text editing software application i e word 5 Open a blank document and display it on the front window of your monitor 6 On the back of the Base Receiver press the Program Button three 3 times 7 Keyboard commands will begin appe...

Страница 3: ...2032 battery Battery life 1 year under normal operation Receiver Interface USB port Dimensions 2 6 66mm L x 3 4 86mm W x 1 2 31mm H Weight 2 oz 59g excluding cable Cables 3ft USB cable A B General Warranty 1 year limited Compliance FCC part 15 Class B for U S Industry Canada RSS 210 FDA 21 CFR 1040 Laser Pointer Information Due to the potential of radiation exposure from the laser the Food and Dru...

Страница 4: ...KRF LSRRS Federal Communications Commission FCC Statement This equipment has been tested to FCC requirements and has been found acceptable for use The FCC requires the following statement for your information This equipment generates and uses radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturer s instructions may cause interference to rad...

Отзывы: