Honeywell PM23c, Руководство пользователя, Страница: 137 / 164

Appendix B – Default Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual 127
Ethernet Settings
This section describes the Ethernet IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications >
Ethernet .
• From the printer web page, click the Configure tab,
Communications > Ethernet .
XON/XOFF To Specifies if software flow control (XON/
XOFF) is used to manage the rate of
data transmission to the host. Disable
XON/XOFF From Specifies if software flow control (XON/
XOFF) is used to manage the rate of
data transmission from the host. Disable
New Line Character Defines the characters that the printer
echoes to the host to indicate that it has
moved to a new line.
CR/LF
Serial Port Settings (continued)
Setting Description Default
Ethernet Settings
Setting Description Default
(IPv4) IP
Assignment
Method Specifies how the printer obtains an
IP address. DHCP
(IPv4) IP
Address Specifies the unique network-level
address that is assigned to each
device in a TCP/IP network (IPv4). 0.0.0.0
Subnet Mask Specifies a number that defines the
range of IP addresses that can be
used in a TCP/IP network. 0.0.0.0
Default Router Specifies the IP address of a router
that is used when a device sends a
packet to another subnet or to an
unknown destination. 0.0.0.0
DHCP Response Specifies if the printer receives
DHCP responses by broadcast or
unicast.
Broadcast