RE252_Honeywell-Compat_PIN-Pad.doc
Page 1 of 4
28-Sep-12
www.ResolutionProducts.com
Wireless
Security
Solutions
RE252 Honeywell Compatible PINpad™
Features
•
Secure, 4-digit Code to disarm
•
1-button arming
•
Red/Green LED arming feedback
•
Small, yet comfortable keypad
•
Mounts on wall via VHB® tape, or screws
•
Secure for carrying in purse or mounting on car visor
•
More securely replaces Honeywell 5878 6-button Wall Touchpad
•
4-6 year battery life on CR2032 battery.
Key Instructions
•
Do NOT use this product for 2GIG panels. Use the RE252
T.
•
PIN Code programming
Default access code is “1234”.
To change access code:
1.
Enter current 4-digit access code.
2.
Within 4 seconds, press and hold the “1” and “3” keys
simultaneously. After 3 seconds, Red LED will be lit.
3.
Enter new 4-digit access code. After successfully changing
the code, the Green LED will be lit
4.
Note new access code . BAD GUY CANNOT RESET CODE.
So it must be noted and remembered!
•
Enrolling:
1.
Refer to the Honeywell control unit installation manual.
2.
Enroll exactly as you would a key fob.
•
Specific Control Panel Programming follows here…
Lynx Touch 5100:
Programming Keys Add New
System Programming…
Key Type
4 Button
User
Master
Serial Number
[press Stay key to enroll]
Zone
49 (example)
Button Key 1 – Zn 49
Arm Away
Button Key 2 – Zn 50
Disarm
Button Key 3 – Zn 51
Arm Stay
Button Key 4 – Zn 52
24 Hour Auxiliary
To RF Learn: Press the PINpad STAY button twice, more than 5 seconds apart.
Be at least 5 feet from panel.
RE252_Honeywell-Compat_PIN-Pad.doc
Page 2 of 4
28-Sep-12
www.ResolutionProducts.com
Lynx Touch 5100, continued…
Lynx Plus 3000 & Vista:
To RF Learn: Press each PINpad button (or PIN Code) twice, more than 5
seconds apart.
Be at least 5 feet from panel.
Be sure to associate the Key with a User!
You may also use WIRELESS KEY TEMPLATE 3.
Operation
2GIG Go! Panel
Use Resolution RE252
T
2GIG-Compatible PINpad for 2GIG panels.
Panic function will not work on 2GIG panel using this RE252
Honeywell version.
PINpad
Button
Lynx Touch
Button Key
Lynx Touch
Loop
Should be
programmed to
Away
Button Key 1
Loop 3
ARM AWAY
PIN Code
Button Key 2
Loop 2
DISARM
Stay
Button Key 3
Loop 4
ARM STAY
Stay + Away
Button Key 4
Loop 1
24 Hour AUX
PINpad
Button
Lynx Plus
Zone Number
Lynx Plus
Zone Type
Lynx Plus
Input Type
Lynx Plus
Loop
Away
26 (example) 21 Arm-Away
BR
Loop 3
PIN Code
27
22 Disarm
BR
Loop 2
Stay
28
20 Arm-Stay
BR
Loop 4
Stay + Away
29
07 24 Hr Aud
BR
Loop 1
PINpad
Button
Panel Action
LED
Stay
ARM STAY
flashes double red
Away
ARM AWAY
flashes double red twice
PIN Code
DISARM
flashes double green
Stay + Away
PANIC ALARM
flashes red 8 times
