19
19
default zone is a Pacific Standard Time (PST). (
Refer to a
MANUAL
SETTINGS
section
)
TEMPERATURE AND ALARM WINDOW
The
Temperature and Alarm Window
displays an indoor temperature
and two time alarms. Press the
MODE
button to select among indoor
temperature, Alarm 1 and Alarm 2. Press the
℃
/
℉
button to change the
temperature unit between degree Celsius and degree Fahrenheit. (The
default display is in degree Fahrenheit.)
TIME AND CALENDAR WINDOWS
The Atomic Clock displays time in an
hour-minutes-seconds
format in
the
Time Window
located below the
Temperature and Alarm Window
.
The date is displayed in
month-date
format next to the day of the week
and moon phase icon in the
Calendar Window
.
MANUAL SETTINGS
If desired, the time, date and other available parameters can be
programmed manually. It is necessary to set your Time Zone manually.
TIME ZONE
•
Enter the US Time Zone programming mode by pressing and
holding the
UP
button for 3 seconds.
•
Keep holding
UP
button until the desired time zone (Pacific,
Mountain, Central or Eastern) is highlighted on the unit’s display
map in the
Time Window
•
Release the
UP
button and the desired Time Zone will be
selected
20
CLOCK
•
Press and hold
MODE
button for 3 seconds until the
year
digits
in the
Calendar Window
will flash
•
Press
UP
or
DOWN
adjusting a correct year
•
Press
MODE
to confirm and move to the next parameter – the
month digit will flash
•
Press
UP
or
DOWN
adjusting the current
month
and then press
MODE
to confirm – the date digit will flash
•
Press
UP
or
DOWN
adjusting the
date
and then press
MODE
to
confirm – the “M” and “D” digits will flash
•
Press
UP
of
DOWN
selecting the calendar display format in
M/ D
or
D/ M
- the hour digit will flash in the
Time Window
•
Press
UP
or
DOWN
adjusting the
hour
and then press
MODE
to
confirm – the
minutes
will flash
•
Press
UP
or
DOWN
adjusting the minutes and then press
MODE
for the last time to confirm after the last parameter is set
DAY OF THE WEEK LANGUAGE
•
Press and hold
LANG
button for 3 seconds to enter into the day
of the week language programming mode: the default language
abbreviation will appear (example –
EN
)
•
Continue holding
LANG
button until the desired day of the week
language abbreviation is displayed
•
Release the
LANG
button and the day of the week will be
displayed in selected language