13
•
Keep holding
UP (
▲
)
button until the desired time zone (Pacific,
Mountain, Central or Eastern) is highlighted on the unit’s display map in
the
Time line
•
Release the
UP (
▲
)
button and the desired Time Zone will be
selected
SETTING CLOCK TIME
•
Press and hold
MODE
button for 3 seconds until the
year
digits in the
Calendar line
will flash
•
Press
UP (
▲
)
or
DOWN (
▼
)
adjusting to correct year
•
Press
MODE
to confirm and move to the next parameter – the month
digit will flash
•
Press
UP (
▲
)
or
DOWN (
▼
)
adjusting the current
month
and then
press
MODE
to confirm – the date digit will flash
•
Press
UP (
▲
)
or
DOWN (
▼
)
adjusting the
date
and then press
MODE
to confirm – the hour digit will flash in the
Time line
•
Press
UP (
▲
)
or
DOWN (
▼
)
adjusting the
hour
and then press
MODE
to confirm – the
minutes
will flash
•
Press
UP (
▲
)
or
DOWN (
▼
)
adjusting the minutes and then press
MODE
to confirm – the temperature unit (
C
or
F
) in the
Temperature
and
Alarm line
will flash
•
Press
UP (
▲
)
or
DOWN (
▼
)
button once selecting the temperature
unit in Fahrenheit or Celsius
•
Press
MODE
for the last time to confirm after the last parameter is set
DAY OF THE WEEK LANGUAGE
•
Press and hold
DOWN (
▼
)
button for 3 seconds to enter into the day
14
of the week language programming mode: the default language
abbreviation will appear (example –
EN
).
•
Continue holding
DOWN (
▼
)
button until the desired day of the week
language abbreviation is displayed.
•
Release the
DOWN
(
▼
) button and the day of the week will be
displayed in selected language.
ALARMS
The Atomic Projection Clock has dual alarm with programmable snooze interval.
If any of the alarms is activated, it will sound at the set time and the alarm icon
will flash Mondays through Fridays.
SETTING THE ALARM
•
Press
MODE
button to view the
ALARM 1
or
ALARM 2
modes. If the
AL 1
is selected, the default time “
6:00
” with the
AL1
label will be
displayed. If the
ALARM 2
is selected, the default time
”8:00
”with the
AL 2
label will be displayed
•
Press and hold
SET
button for three seconds - the hour digit will
flash
•
Enter the hour using
DOWN (
▼
)
or
UP (
▲
)
buttons
•
Press
SET
button once - the minute digits will flash
•
Enter minutes using
DOWN (
▼
)
or
UP (
▲
)
buttons
•
Press
SET
button once again. The minute digits for snooze
interval will flash
•
Enter the desired interval in minutes (from 1 to 59) using
DOWN (
▼
)
or
UP (
▲
)
buttons
•
Press
SET
button once confirming the
ALARM 1
time is set.
