Honeywell Notifier NFS2-640/E, Руководство по программированию, Страница: 121 / 126

121 NFS2-640/E Programming Manual — P/N 52742:L2 7/17/14
Index
A
Abort Switch 28
,
29
,
60
basic configuration example 63
configuration example with monitor mod-
ule 74
Definition 62
how it works 62
to program 62
,
74
Type Code (ULI,IRI,NYC, or AHJ) 60
AC delay enable 32
Acclimate, detector sensitivity settings 101
ACS Annunciation, releasing applications 91
ACS annunciators
ACS Selection Groups A through W 35
–
41
annunciation points 34
annunciator display 34
Selection Groups, global setting 32
selection of display information 33
AHJ Abort Switch
example 69
programming 68
Alarm
Alarm Verification Timer 31
Scroll 48
to select sensitivity 101
Alarm Verification Counters. See Detector head-
ings.
55
Alarm Verification Timer 31
annunciation points 34
Argument 108
Auto Silence Timer 31
Autoprogram 14
,
15
–
18
default values 18
to add/remove device 16
to create a new program 15
Auxiliary Control Functions, releasing applica-
tions
91
B
BACKUP option switch for NACs 60
Basic Program 13
,
14
–
47
Baud rate
CRT Serial Port 51
Printer Serial Port 50
Beam, detector sensitivity settings 101
Blink rate for SLC device LED 32
C
California Code 28
,
94
Canadian Two-Stage 94
Caution
Definition 8
Do not program detectors as CLIP... 50
Do not program more than 99 CLIP... 50
CBE (Control-By-Event) 106
–
109
example 109
CBE list 20
,
92
,
93
Check option (program errors) 47
Clear memory 15
CLIP (Classic Loop Interface Protocol) 13
,
49
Coding Function Selections 94
Coding, Special Zone F8 18
,
28
,
30
,
93
Control Module
to program 23
Cooperative Multi-Detector Sensing 98
Cross Zone 28
,
29
,
60
programming example 71
to activate a Releasing Zone 70
Types 70
,
71
Custom label 20
D
DCC Mode 49
Default values, autoprogram 18
Delay Timer 28
,
29
,
60
to program 61
Detector
Alarm Sensitivity Levels 97
Initialization and System Testing 110
Pre-Alarm Sensitivity Level 97
Print a Detector Maintenance Report 104
Program Values 20
to Access Detector Maintenance Informa-
tion 103
to change sensitivity level 52
,
54
to clear alarm verification counters 52
,
55
to disable programmed points 52
to manually initialize 111
to program point 20
to replace 110
to Test Detectors Set Below 0.50% Obscu-
ration per Foot 102
Detector Initialization 110
–
111
Device
to add 16
to remove 17
Drift Compensation 95
graphic representation 96
E
Equations
Argument Entries 108