4
ACT-25 —
P/N 53432:A 7/07/2008
Figure 3 Wiring Illustration: Signal from AA-30
NOTES: In Figure 2, note the following:
1. Using the grounding wire supplied, connect the “EARTH” ground terminal of each ACT-25 to P8, terminal 9 or 10 on
the AA-100/AA-100E or AA-120/AA-120E, or to P2, terminal 1 or 8 of the AA-30/AA-30E. The “COMM” terminal
is intended for shielding of the output of the ACT-25. Connect to the common of the local power supply.
2.
This symbol indicates a local common, in this case for power supply number three.
3. Dotted lines indicate shield.
Refer to the appropriate fire system manual for further information.
3
