manualshive.com logo in svg

Honeywell MS9500 Voyager Series, Руководство пользователя, Страница: 44 / 52

Поделиться
Скачать
Honeywell MS9500 Voyager Series Скачать руководство пользователя страница 44

 

P

ATENTS 

 

 
This Honeywell product may be covered by, but is not limited to, one or more of 
the following U.S. Patents: 
 
US Patent No. 
 
5,081,342; 5,260,553; 5,340,971; 5,340,973; 5,424,525; 5,468,951; 5,484,992; 
5,525,789; 5,528,024; 5,591,953; 5,616,908; 5,627,359; 5,661,292; 5,777,315; 
5,789,730; 5,789,731; 5,811,780; 5,825,012; 5,828,048; 5,883,375; 5,886,337; 
5,895,907; 5,925,870; 5,925,871; 5,939,698; 6,029,894; 6,189,793; 6,209,789; 
6,227,450; 6,283,375; 6,347,743; 6,412,700; 6,499,664; 6,575,369; 6,607,133; 
6,619,549; 6,637,655; 6,637,659; 6,863,217; 6,874,689; 6,905,071; 6,975,456; 
6,976,632; 7,007,849; 7,017,813; 7,044,383; 7,124,950; 7,156,310; 7,252,238; 
7,255,280; 7,278,578; 7,325,740; D408,532; 
 
No license, right or sublicense is granted, either expressly or by implication, 
estoppel, or otherwise, under any Metrologic, Honeywell or third party intellectual 
property rights (whether or not such third party rights are licensed to Metrologic 
and/or Honeywell), including any third party patent listed above, except for an 
implied license only for the normal intended use of the specific equipment, 
circuits, and devices represented by or contained in the products that are 
physically transferred to the user, and only to the extent of those license rights 
and subject to any conditions, covenants and restrictions therein. 
 

 

Other worldwide patents pending. 
 

 

40 

Содержание MS9500 Voyager Series





















































Отзывы:

Нет отзывов