MBeacon
User’s Guide
26
Step from digit to digit from left to right by pressing [MODE]. Change a
digit’s value by pressing [Y/+] to increase and [N/-] to decrease. When
you press [MODE] you see a flashing “?” after the second digit:
Save your changes by pressing [Y/+].
Exit without saving changes by pressing [N/-].
Step back to the first digit by pressing [MODE].
If you have saved the channel number successfully, you see these screens
in sequence:
Important!
Remember that the range of allowed channels for
instruments on a MBeacon’s network depends on the wireless modem
frequency. Therefore, you may not be able to change the channel to a
number outside of its assigned set of numbers. If you select an
incompatible channel number, you will see this screen, and then the
MBeacon returns to the Wireless menu.
