Honeywell MAXON VALUPAK-II 150, Технический каталог

Страница: 2 / 12

VALUPAK®-II
32-00188-01 2 E - m - 6/18
AVAILABLE VALUPAK®-II SIZES
[1] Air pressure switches should be selected to have a setpoint ranging from (2-10) mbar-, with exception of the
VALUPAK®-II 60 burner with a capacity of 40 kW or 60 kW: setpoint ranging from (0.4 - 3) mbar
[2] Single phase blower motor available.
[3] Use of the standard round air inlet filter will cause a ± 15% capacity reduction. UMI blowers are not suited for filters.
Use of the standard VALUPAK®-II burner at 60 Hz will result in a higher max. capacity to which the gas pressures
need to be adapted.
[4] When firing in open air. Firing in a cross flow shortens flame.
[5] As an alternative blower U/HC 142 (0.18 kW)can be used , performance are same as with UMI300 blower
Protection: IP 54
Capacity and selection data in kW, 50 Hz operation
Gross heating value = 10.9 kWh/m
3
(st), d = 0.6
All figures are for balanced - 0 mbar - duct pressure
[1]
VALUPAK®-II size 60
[2]
150
[2]
300
[2]
600
Standard blower type
UHC
102
UHC
122
UMI
300
UMI
300
U/HC
122
UMI
300
[5]
UMI
390
Maximum heat release
[3]
kW (HHV) 40 60 80 225 185 290 360 558
Minimum heat release kW (HHV) 2 2 3 6 6 6 10 15
Turndown 20:1 30:1 27:1 38:1 31:1 48:1 36:1 37
Gas Q max.
m
3
(st)/h
3.7 5.5 7.3 21.8 17.9 28.1 34.8 54
Gas Q min.
m
3
(st)/h
0.18 0.18 0.28 0.6 0.6 0.6 1 1.5
Max. combustion air volume
m
3
(st)/h
48 64 98 251 206 323 401 622
Gas pressure at test connection
at maximum heat release
mbar 5.4 9 18 14.6 9.8 5 7.7 10.2
Gas pressure at inlet burner
at maximum heat release
mbar 6.7 11.5 24 20.8 14.2 10.8 15.2 16.2
Blower motor 3x220-420x50 Hz kW 0.09 0.25 0.09 0.25 0.55 1.1
Weight kg n/a 24.2 20 29.7 31.5 47.6
Flame length
[4]
m up to 0.4 (after sleeve) 1 1 1.3 1.5 1.6
VALUPAK ® -II 60
VALUPAK
®
-II 600
VALUPAK ® -II 150
VALUPAK
®
-II 300
1) 1/2" NPT gas inlet
2) 3/4" NPT gas inlet
3) 1" NPT gas inlet
4) 1" NPt gas inlet
1
2
3
4