4.
Technical data
Int. protection acc.to DIN 40 050/EN 60 529
IP 67
Environmental class according to VdS
III
Operating temperature range
-25 °C to +60 °C
Colour
Traffic white (similar to RAL 9016)
VdS approval
in combination with all VdS approved
IDENTLOC sensors
The transmission unit 032220.17 complies with the essential requirements of the R&TTE
1999/5/EC Directive, if used for its intended use.
The EC-Declaration of Conformity can be downloaded from our homepage (Service / Download).
After successful completion of the functional check, the screw openings of the
transmission unit must be covered by means of the supplied VdS sealing stickers!
3.2
Cable routing
connecting cable to the EU
view from
the bottom
possible cable bushings
(punch them through if required)
possible cable bushings
(punch them through if required)
Depending on the mounting type, the cable
can also be guided downwards (instead of
using the lateral cable bushings).
3.3
Plug-in mounting
If required, it is possible to install the transmission unit without housing in a bore with 8 mm
diameter.
ATTENTION:
Installation in metal sections (e.g. aluminum) is not possible!
transmission unit without housing
connecting cable to the EU
3.4
Connecting the transmission unit
red
white
shield
Mounting and Connection Instructions IDENTLOC Transmission Unit
7
