S T E P 2 : H E A T O U T P U T
Your unit has three output levels
HIGH: 1500 Watt Heating
MED: 900 Watt Heating
LOW: 600 Watt Heating
• Push the up button (
+
) to increase output level and push the down
button (
–
) to decrease output level. The LED's will illuminate to
reflect which output level you have selected (Fig. 8).
S T E P 3 : S E T T H E R M O S T A T
• Adjust your thermostat anywhere between 60°F (15°C) and
80°F (27°C).
• Push the up button (
+
) to increase the desired temperature and
push the down button (
–
) to decrease the desired temperature
level. The LED's will illuminate to reflect the temperature you have
selected (Fig. 9).
For example:
If you set your thermostat at 65°F (18°C), the 60°F
(15°C) and 65°F (18°C) LED’s will be illuminated.
• Once you have set your desired temperature, the unit will operate
under this desired setting until the unit is turned off.
• When the desired temperature has been reached, the unit will
automatically shut off. (The thermostat LED's will remain
illuminated)
• Your unit will turn back on when the current room temperature
decreases below your desired temperature.
S T E P 4 : C H I L D - L O C K F E A T U R E
• This heater is equipped with a child-lock feature. This feature will
keep the established settings from being adjusted unintentionally.
To activate the child-lock, once the desired settings have been
established, depress the up button (
+
) and down button (
–
) at the
same time and hold for 3 seconds (Fig 10). To deactivate the
child-lock, depress the same up button (
+
) and down button (
–
) at
the same time and hold for 3 seconds.
NOTE:
This feature will not keep the heater from being turned on.
It will, however, keep the controls from being adjusted once the
heater has been set.
HZ-3220 OPERATION
(CONTINUED)
Fig. 9
Fig. 8
Fig. 7
Heat Output
Control
Thermostat
Control
Power
Button
Fig. 10
HZ-2200-3200-3220_OM_Rev1.qx 6/8/05 1:19 PM Page 5